Goerli Testnet

Contract

0x115033F49Ca27cB3A61Cf3e7bE8b4EA35eb11763

Overview

ETH Balance

Multichain Info

N/A
Transaction Hash
Method
Block
From
To
Value
0x6080604085502312023-02-24 21:35:48397 days ago1677274548IN
 Create: CumulativeMerkleDistributor
0 ETH0.0165788213.38140184

Advanced mode:
Parent Txn Hash Block From To Value
View All Internal Transactions
Loading...
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
CumulativeMerkleDistributor

Compiler Version
v0.8.14+commit.80d49f37

Optimization Enabled:
Yes with 1000 runs

Other Settings:
default evmVersion

Contract Source Code (Solidity Standard Json-Input format)

File 8 of 8 : CumulativeMerkleDistributor.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.8.14;
pragma abicoder v1;

import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import {EnumerableSet} from '@openzeppelin/contracts/utils/structs/EnumerableSet.sol';

contract CumulativeMerkleDistributor is Ownable {
  using SafeERC20 for IERC20;
  using EnumerableSet for EnumerableSet.AddressSet;

  EnumerableSet.AddressSet private _tokens;

  mapping(address => bytes32) public erc20MerkleRoots;
  bytes32 public ethMerkleRoot;

  // user address => token address => cumulative amount claimed
  mapping(address => mapping(address => uint256)) public cumulativeErc20Claimed;
  // user address => cumulative amount claimed
  mapping(address => uint256) public cumulativeEthClaimed;

  ///@notice user events
  event Erc20MerkleRootUpdated(address token, bytes32 oldRoot, bytes32 newRoot);
  event EthMerkleRootUpdated(bytes32 oldRoot, bytes32 newRoot);

  event Erc20Claimed(address token, address user, uint256 amount);
  event EthClaimed(address user, uint256 amount);

  ///@notice admin events
  event EthWithdrawn(address destination, uint256 amount);
  event Erc20Withdrawn(address destination, address currency, uint256 amount);
  event Erc20Added(address token);
  event Erc20Removed(address token);

  constructor() {}

  receive() external payable {}

  // ================================================== USER FUNCTIONS ==================================================

  function claimErc20(
    address token,
    address account,
    uint256 cumulativeAmount,
    bytes32 expectedMerkleRoot,
    bytes32[] calldata merkleProof
  ) external {
    require(erc20MerkleRoots[token] == expectedMerkleRoot, 'Invalid proof');

    // Verify the merkle proof
    bytes32 leaf = keccak256(abi.encodePacked(account, cumulativeAmount));
    require(_verifyAsm(merkleProof, expectedMerkleRoot, leaf), 'Invalid proof');

    // Mark it claimed
    uint256 preclaimed = cumulativeErc20Claimed[token][account];
    require(preclaimed < cumulativeAmount, 'Nothing to claim');
    cumulativeErc20Claimed[token][account] = cumulativeAmount;

    // Send the token
    unchecked {
      uint256 amount = cumulativeAmount - preclaimed;
      IERC20(token).safeTransfer(account, amount);
      emit Erc20Claimed(token, account, amount);
    }
  }

  function claimEth(
    address account,
    uint256 cumulativeAmount,
    bytes32 expectedMerkleRoot,
    bytes32[] calldata merkleProof
  ) external {
    require(ethMerkleRoot == expectedMerkleRoot, 'Invalid proof');

    // Verify the merkle proof
    bytes32 leaf = keccak256(abi.encodePacked(account, cumulativeAmount));
    require(_verifyAsm(merkleProof, expectedMerkleRoot, leaf), 'Invalid proof');

    // Mark it claimed
    uint256 preclaimed = cumulativeEthClaimed[account];
    require(preclaimed < cumulativeAmount, 'Nothing to claim');
    cumulativeEthClaimed[account] = cumulativeAmount;

    // Send ETH
    unchecked {
      uint256 amount = cumulativeAmount - preclaimed;
      (bool sent, ) = account.call{value: amount}('');
      require(sent, 'failed to send ether to claimer');
      emit EthClaimed(account, amount);
    }
  }

  // ==================================================== HELPERS =====================================================

  function _verifyAsm(
    bytes32[] calldata proof,
    bytes32 root,
    bytes32 leaf
  ) private pure returns (bool valid) {
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let mem1 := mload(0x40)
      let mem2 := add(mem1, 0x20)
      let ptr := proof.offset

      for {
        let end := add(ptr, mul(0x20, proof.length))
      } lt(ptr, end) {
        ptr := add(ptr, 0x20)
      } {
        let node := calldataload(ptr)

        switch lt(leaf, node)
        case 1 {
          mstore(mem1, leaf)
          mstore(mem2, node)
        }
        default {
          mstore(mem1, node)
          mstore(mem2, leaf)
        }

        leaf := keccak256(mem1, 0x40)
      }

      valid := eq(root, leaf)
    }
  }

  // ======================================================= VIEW FUNCTIONS ============================================================

  function numTokens() external view returns (uint256) {
    return _tokens.length();
  }

  function getTokenAt(uint256 index) external view returns (address) {
    return _tokens.at(index);
  }

  function isValidToken(address token) external view returns (bool) {
    return _tokens.contains(token);
  }

  // =========================================== ADMIN FUNCTIONS ===========================================

  /// @dev Used for withdrawing any ETH wrongly sent to the contract
  function withdrawEth(address destination) external onlyOwner {
    uint256 amount = address(this).balance;
    (bool sent, ) = destination.call{value: amount}('');
    require(sent, 'failed');
    emit EthWithdrawn(destination, amount);
  }

  /// @dev Used for withdrawing any ERC20 tokens wrongly sent to the contract
  function withdrawErc20(
    address destination,
    address currency,
    uint256 amount
  ) external onlyOwner {
    IERC20(currency).transfer(destination, amount);
    emit Erc20Withdrawn(destination, currency, amount);
  }

  function addToken(address token) external onlyOwner {
    _tokens.add(token);
    emit Erc20Added(token);
  }

  function removeCurrency(address token) external onlyOwner {
    _tokens.remove(token);
    emit Erc20Removed(token);
  }

  function setErc20MerkleRoot(address token, bytes32 merkleRoot) external onlyOwner {
    bytes32 oldMerkleRoot = erc20MerkleRoots[token];
    erc20MerkleRoots[token] = merkleRoot;
    emit Erc20MerkleRootUpdated(token, oldMerkleRoot, merkleRoot);
  }

  function setEthMerkleRoot(bytes32 merkleRoot) external onlyOwner {
    bytes32 oldEthMerkleRoot = ethMerkleRoot;
    ethMerkleRoot = merkleRoot;
    emit EthMerkleRootUpdated(oldEthMerkleRoot, merkleRoot);
  }
}

File 2 of 8 : Ownable.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

File 3 of 8 : draft-IERC20Permit.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

File 4 of 8 : IERC20.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

File 5 of 8 : SafeERC20.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

File 6 of 8 : Address.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

File 7 of 8 : Context.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

File 8 of 8 : EnumerableSet.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

Settings
{
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

Contract ABI

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"Erc20Added","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Erc20Claimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"bytes32","name":"oldRoot","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"newRoot","type":"bytes32"}],"name":"Erc20MerkleRootUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"Erc20Removed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"destination","type":"address"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Erc20Withdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EthClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"oldRoot","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"newRoot","type":"bytes32"}],"name":"EthMerkleRootUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"destination","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EthWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"addToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"cumulativeAmount","type":"uint256"},{"internalType":"bytes32","name":"expectedMerkleRoot","type":"bytes32"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"claimErc20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"cumulativeAmount","type":"uint256"},{"internalType":"bytes32","name":"expectedMerkleRoot","type":"bytes32"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"claimEth","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"cumulativeErc20Claimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"cumulativeEthClaimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"erc20MerkleRoots","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ethMerkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getTokenAt","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"isValidToken","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numTokens","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"removeCurrency","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"}],"name":"setErc20MerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"merkleRoot","type":"bytes32"}],"name":"setEthMerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"destination","type":"address"},{"internalType":"address","name":"currency","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawErc20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"destination","type":"address"}],"name":"withdrawEth","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

Deployed Bytecode

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

Block Transaction Difficulty Gas Used Reward
View All Blocks Produced

Block Uncle Number Difficulty Gas Used Reward
View All Uncles
Loading...
Loading

Validator Index Block Amount
View All Withdrawals

Txn Hash Block Value Eth2 PubKey Valid
View All Deposits
[ Download: CSV Export  ]

A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.